TheorboThe theorbo is a plucked string instrument of the lute family, with an extended neck and a second pegbox. Like a lute, a theorbo has a curved-back sound box (a hollow box) with a wooden top, typically with a sound hole, and a neck extending out from the soundbox. As with the lute, the player plucks or strums the strings with one hand while "fretting" (pressing down) the strings with the other hand; pressing the strings in different places on the neck produces different pitches (notes), thus enabling the performer to play chords, basslines and melodies.
It is related to the liuto attiorbato, the French théorbe des pièces, the archlute, the German baroque lute, and the angélique or angelica. A theorbo differs from a regular lute in that the theorbo has a much longer neck which extends beyond the regular fingerboard/neck and a second pegbox at the end of the extended neck. Low-register bass strings are added on the extended neck. This gives a theorbo a much wider range of pitches (notes) than a regular lute. The theorbo was used during the Baroque music era (1600–1750) to play basso continuo accompaniment parts (as part of the basso continuo group, which often included harpsichord, pipe organ and bass instruments), and also as a solo instrument.
Origin and developmentTheorbos were developed during the late sixteenth century in Italy, inspired by the demand for extended bass range instruments for use in the then-newly developed musical style of opera developed by the Florentine Camerata and new musical works utilising basso continuo, such as Giulio Caccini's two collections, Le nuove musiche (1602 and 1614). For his 1607 opera L'Orfeo, Claudio Monteverdi lists duoi (two) chitaroni among the instruments required for performing the work. Musicians originally used large bass lutes (c. 80+ cm string length) and a higher re-entrant tuning; but soon created neck extensions with secondary pegboxes to accommodate extra open (i.e. unfretted) longer bass strings, called diapasons or bourdons, for improvements in tonal clarity and an increased range of available notes.
Although the words chitarrone and tiorba were both used to describe the instrument, they have different organological and etymological origins; chitarrone being in Italian an augmentation of (and literally meaning large) chitarra – Italian for guitar. The round-backed chitarra was still in use, often referred to as chitarra Italiana to distinguish it from chitarra alla spagnola in its new flat-backed Spanish incarnation. The etymology of tiorba is still obscure; it is hypothesized the origin may be in Slavic or Turkish torba, meaning 'bag' or 'turban'.
According to Athanasius Kircher, tiorba was a nickname in Neapolitan language for a grinding board used by perfumers for grinding essences and herbs. It is possible the appearance of this new large instrument (particularly in a crowded ensemble) resulted in jokes and a humour induced reference with popular local knowledge becoming lost over time and place. Robert Spencer has noted the confusion the two names were already leading to in 1600: Chitarone, ò Tiorba che si dica (chitarrone, or theorbo as it is called). By the mid-17th century it would appear that tiorba had taken preference – reflected in modern practice, helping to distinguish the theorbo now from very different instruments like the chitarrone moderno or guitarrón. Similar adaptations to smaller lutes (c. 55+ cm string length) also produced the arciliuto (archlute), liuto attiorbato, and tiorbino, which were differently tuned instruments to accommodate a new repertoire of small ensemble or solo works. In the performance of basso continuo, theorboes were often paired with a small pipe organ.
The most prominent early composers and players in Italy were Giovanni Girolamo Kapsperger and Alessandro Piccinini. Giuliano Paratico was another early Italian chitarrone player. Little solo music survives from England, but William Lawes and others used theorbos in chamber ensembles and opera orchestras. In France, theorbos were appreciated and used in orchestral or chamber music until the second half of the 18th century (Nicolas Hotman, Robert de Visée). Court orchestras at Vienna, Bayreuth and Berlin still employed theorbo players after 1750 (Ernst Gottlieb Baron, Francesco Conti). Solo music for the theorbo is notated in tablature, a form of music notation in which the frets and strings which a player must press down are printed on a series of parallel lines which represent the strings on the fretboard.
Tuning and strings
The tuning of large theorboes is characterized by the octave displacement, or "re-entrant tuning", of the two uppermost strings. Piccinini and Michael Praetorius mention the occasional use of metal strings (brass and steel, as opposed to gut strings). The Laute mit Abzügen: oder Testudo Theorbata that appears in Syntagma Musicum by Praetorius, has doubled strings (courses) passing over the bridge and attached to the base of the instrument – different to his Paduanische Theorba (opposite in the same illustration which seems to have single strings). The Lang Romanische Theorba: Chitarron also appears to have single strings attached to the bridge. The string "courses", unlike those of a Renaissance lute or archlute, were often single, although double stringing was also used. Typically, theorboes have 14 courses, though some used 15 or even 19 courses (Kapsberger).
15-course Theorbo tuning chart
This is theorbo tuning in A. Modern theorbo players usually play 14-course (string) instruments (lowest course is G). Some players have used a theorbo tuned a whole step lower in G. Most of the solo repertoire is in the A tuning. The "re-entrant tuning" created new possibilities for voice leading and inspired a new right hand technique with just thumb, index and middle fingers to arpeggiate chords, which Piccinini likened to the sound of a harp. The bass tessitura (range) and re-entrant stringing mean that in order to keep the figured bass "realisation" (the improvised playing of chords) above the bass instruments when accompanying basso continuo, the bassline must sometimes be played an octave lower (Kapsberger). In the French treatises, chords in which a lower note sounds after the bass were also used when the bass goes high. The English theorbo had just the first string at the lower octave (Thomas Mace).
ItalyThe theorbo was developed in Italy, and so has a rich legacy in Italian music as both a solo and continuo instrument. Caccini comments in Le nouve musiche (1602) that the theorbo is perfectly suited for accompanying the voice as it can give a very full support without being obscured by the vocalist, indicating the beginning of an Italian tradition of monodic songs accompanied by theorbo. Italians called the theorbo’s diapasons its “special excellence”. Italians viewed the theorbo as an easier alternative to the lute since the general attractiveness of its sound quality can cover over indifferent playing and lazy voice leading.
The Italian theorbo first came to England at the beginning of the seventeenth century, but an alternate design based on the English two-headed lute, designed by Jaques Gaultier, soon became more popular. English theorbos were generally tuned in G and double strung throughout, with only the first course in reentrant tuning. Theorbos tuned in G were much better suited to flat keys, and so many English songs or consort pieces that involved theorbo were written in flat keys that would be very difficult to play on a theorbo in A. By the eighteenth century, the theorbo had fallen out of fashion in England due to its large size and low pitch. It was replaced by the archlute.
FranceThe first mention of a theorbo in France was in 1637, and by the 1660s it had replaced the 10-course lute as the most popular accompanying instrument. The theorbo was a very important continuo instrument in the French court and multiple French theorbo continuo tutors (method books) were published by Delair (1690), Campion (1716 and 1730), Bartolotti (1669), Fleury (1660), and Grenerin (1670). French theorbos had up to eight stopped strings and were often somewhat smaller and quieter than Italian theorbos. They were a standard scale length of 76 cm, which made them smaller than Italian instruments, that ranged from 85-95 cm.
GermanyGerman theorbos would also today be called swan-necked Baroque lutes; seventeenth-century German theorbists played single-strung instruments in the Italian tuning transposed down a whole step, but eighteenth-century players switched to double-strung instruments in the “d-minor” tuning used in French and German Baroque lute music so as to not have to rethink their chord shapes when playing theorbo. These instruments came to be referred to as theorbo-lutes. Baron remarks that “the lute, because of its delicacy, serves well in trios or other chamber music with few participants. The theorbo, because of its power, serves best in groups of thirty to forty musicians, as in churches and operas.” Theorbo-lutes would likely have been used alongside Italian theorbos and archlutes in continuo settings due to the presence of Italian musicians in German courts and also for the purpose of using instruments that were appropriate for whatever key the music was in.
TechniqueThe theorbo is played much like the lute, with the left hand pressing down on the fingerboard to vary the resonating length of the strings (thus playing different notes and making chords, basslines and melodies playable) while the right fingertips pluck the strings. The most significant differences between theorbo and lute technique are that theorbo is played with the right thumb outside the hand, as opposed to Renaissance lute which is played with the thumb under the hand. Additionally, the right hand thumb is entirely responsible for playing the bass diapasons and rarely comes up onto the top courses. Most theorbists play with the flesh of their fingers on the right hand, although there is some historical precedent from Piccinini, Mace, and Weiss to use nails. Fingernails can be more effective on a theorbo than on a lute due to its single-strung courses, and the use of nails is most often suggested in the context of ensemble playing where tone quality becomes subservient to volume.
Solo repertoireThe theorbo’s solo Baroque repertoire comes almost exclusively from Italy and France, with the exception of some English music written for the English theorbo. The most effective and idiomatic music for the theorbo takes advantage of its two most unique qualities: the diapasons and the reentrant tuning. Campanella passages that allow scale passages to ring across multiple strings in a harp-like fashion are particularly common and are a highly effective tool for the skilled theorbist/composer.
Italy: Kapsberger, Piccinini, Castaldi
France: de Visee, Bartolotti, Hurel, le Moyne
A few modern composers have begun to write new music for the theorbo; significant works have been composed by Roman Turovsky, David Loeb, Bruno Helstroffer, Thomas Bocklenberg, and Stephen Goss, who has written the only concerto for theorbo.
ContinuoThe theorbo’s primary use was as a continuo instrument. However, due to its layout as a plucked instrument and its reentrant tuning, following strict voice leading parameters could sometimes be difficult or even impossible. Thus, a style of continuo unique to the theorbo was developed that incorporated these factors:
Thus, the preservation of the bass line and the sound of the instrument are of the highest priority when used as a continuo instrument. Breaking voice leading rules becomes necessary in order to preserve the bass line and bring out the unique tones of the theorbo.
The theorbo is labelled by Praetorius as both a fundamental and an ornamental continuo instrument, meaning it is capable of supporting an ensemble as a primary bass instrument while also fleshing out the harmony and adding color to the ensemble by means of chord realizations.